Side Mount Spool Holder light V2

Welcome to second iteration of my remix of the side spool holder originally designed by ryan.fransen. This remix retains the previous version effectiveness but introduces some improvements:The upper arm it's more stiff and centred to the roller.The screw both male and female side are way bigger and solid, and left threaded to ensure the roller stay in position.NO MORE bearings. In my test I found that the bearings are cool but useless so I try this method but honestly it's probably not need rolling tube at all. The spool rotate smooth and free over the roller.Adaptive layer high to improve speed and print quality.Additional hardware:4 M3x20mm screws1 PC4-M10 “pass thru“ connectorsIf you want you can lubricate the roll using the specific hole. I tried to use some grease but it's to dense and made the roller rotate smooth but slower, it' probably better to use some WD40 or nothing at all.If you need tou use also the AMS you can use a Y splitter as show in the picture, the