Side shelf for Kobra S1 Max D3P riser

MODEL This model is for a side shelf for use with the Kobra S1 Max D3P riser - Link: 🧞‍♂️ Anycubic Kobra S1 Max D3P riser・ 3MF File for 3D printing・Cults The shelf allow the Kobra S1 Max D3P riser to hold a single dryer unit.   A right and a left side shelf is included. Left and right are reference as your left or right when looking at and facing the front of the printer. 3D PRINTING PRINT SETTINGS IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing with support painted. I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings. 3D PRINT SETTINGS I use the following settings and materials to print this model: Infill % : 15% (no need for more) Nozzle diameter: 0.4 mm Layer height: 0.2 mm standard Walls: The model is set for 2 walls. Some users have reported better rigidity with 3 walls. Material: The Anycubic Kobra S1 Max has an internal heater. PETG is the preferred choice for filament as it is about the same price as PLA but will sustain higher temps without deforming. You can also print the riser using ASA or ABS but this is more challenging due to possibility of warping. If you will only be printing PLA or PETG and will not place a dryer on the riser then you can print in PLA. This suggestion applies to the entire riser and not only the base parts.  ABOUT ME   I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. Y