MakerWorld
Other House Models
Voir le modèle
Sideways Air Vent Deflector
628
Téléchargements
209
Likes
391
Makes
Horizontal Air Vent Deflector for redirecting heat and air sidewaysRedirects forced hot air and central ac sideways instead of straight out. Attaches to the metal floor grate using six 8x2mm magnets (Makers Supply CA005). The magnet holes have a .25mm tolerance, so it may or may not be friction fit depending on how much shrinkage you experience. I printed with PETG-HF and used a drop of CA glue for each magnet. The vent cover is 256 x 126.16 mm (approximately 10"x5" ) with an inside channel width of 89mm (approximately 3.5"); the metal registers in the photo measure 11.5" x 5.25" I've added an additional profile for the A1 Mini which reduces the length of the cover to 180mm (approximately 7" long); the other dimensions are the same as the original. Boost MeIf you find my models useful or helpful and would like to encourage me to continue creating, please consider giving me a boost!
Petezilla publie également sur
9 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
