Thingiverse
Siemens Camera MVV440 Stand
von pjsmartins
0
Downloads
0
Likes
0
Makes
PLA support for Siemens MV440 camera. The stand has a base of 100mmX100mm and a height of 215mm. The camera lens will be at a height of 70mm from the base.
Each of the pieces took around 21 hours to produce.
The layout of the parts was built in Fusion360 and I used PrusaSlicer for printing.
Other print settings:
* Speed 50mm/s
* bed temperature 65º
Nozzle temperature 220º
* Brim type: Outer brim only
Infill: 15%
* Material: PLA, black
Each of the pieces took around 21 hours to produce.
The layout of the parts was built in Fusion360 and I used PrusaSlicer for printing.
Other print settings:
* Speed 50mm/s
* bed temperature 65º
Nozzle temperature 220º
* Brim type: Outer brim only
Infill: 15%
* Material: PLA, black
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!