Thingiverse
Siemens IPC 477D PFSense Firewall Conversion
2
Downloads
0
Likes
0
Makes
***Introduction***
This overall project comprises 5 components,
1. Base of the whole case.
2. Heatsink Holder.
3. First Part of the side frame.
4. Second part of the side frame.
5. Top Cover.
***Assembly***
First assemble the two side frames using the provided joints.
The remainder of the component installation is performed using M2.5 x 10 screws.
***Update 17/06/2022***
I figured out, although the motherboard bios consists of VT-D and PCI Pass through, the i3-3217ue CPU doesn't support VT-D. Therefore, I have to change the overall plan of virtualizing and install the PfSense in bare-metal.
I have also designed a top cover and uploaded here.
This overall project comprises 5 components,
1. Base of the whole case.
2. Heatsink Holder.
3. First Part of the side frame.
4. Second part of the side frame.
5. Top Cover.
***Assembly***
First assemble the two side frames using the provided joints.
The remainder of the component installation is performed using M2.5 x 10 screws.
***Update 17/06/2022***
I figured out, although the motherboard bios consists of VT-D and PCI Pass through, the i3-3217ue CPU doesn't support VT-D. Therefore, I have to change the overall plan of virtualizing and install the PfSense in bare-metal.
I have also designed a top cover and uploaded here.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!