Silica gel container

This is a large container for silica gel (dessicant) that should be able to take 1 kg of silica gel consisting of granules with a diameter larger than 1.9 mm.

This is loosely based on Malolo's Silica Gel containers series, but I've modeled it myself from scratch with inner wall supports, so it is not a remix. Malolo's version: https://www.thingiverse.com/thing:3494496

At 90% scale it takes a bit less than 1kg, which is how I printed it on my Prusa i3 MK2 (not enough Z for 100%).

The 4 holes in the upper part of the container (the lid) are for attaching rope so the container can be suspended from a hook in the safe or ceiling. Just use two short ropes of around 1 mm diameter and make knots at the ends of the ropes so it stays in place.

It prints without supports, use PETG, might also be possible with PLA (leave a comment if you've tried it).

The printing time for me was almost 32 hours with a layer height of 0.2 and 20% cubic infill, but it should be possible to print it