Silksong Hueforge

Hornet from SilkSong HueForge art. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 150x99.72mm in size You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.72mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #00358e PLA BambuLab Silk Blue Transmission Distance: 0.4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 3 #fffcfc PLA Eureka Ghost White Transmission Distance: 3 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #13 (0.64mm) swap to Blue At layer #16 (0.76mm) swap to Red At layer #29 (1.28mm) swap to Ghost White for the rest.