Thingiverse
Sim Racing Dashboard Case- Raspberry Pi 4
di AcidicCane
0
Download
0
Likes
0
Makes
A simrig mountable racing dashboard case for a Raspberry Pi 4 with a 3.5" TFT attached. (The TFT has an extra header block to give space for the RPI's heatblock.)
- The back has a 6mm holes for aluminum extrusion.
- RPI is mounted inside with 6 mm nylon pcb spacers.
- When installing the RPI, its best to put 2 spacers on the board, and two on the case beforehand(its a tight fit, so the USB-C port must be tilted in first, then the other side can be pushed down onto the spacers)
- Once all is complete, snap port cover on, and slide the front cover on top.
Project Details:
- Since this project uses SimHub, you can find several tutorials.
- https://www.bobrathbone.com/raspberrypi/pi_simhub.html
- In summary:
- You must install a desktop Pi OS
- Install Chromium
- Enable autologin in raspi-config
- Flip display and touchscreen controls.
- Find the ip-address of the computer your using and type:
- The back has a 6mm holes for aluminum extrusion.
- RPI is mounted inside with 6 mm nylon pcb spacers.
- When installing the RPI, its best to put 2 spacers on the board, and two on the case beforehand(its a tight fit, so the USB-C port must be tilted in first, then the other side can be pushed down onto the spacers)
- Once all is complete, snap port cover on, and slide the front cover on top.
Project Details:
- Since this project uses SimHub, you can find several tutorials.
- https://www.bobrathbone.com/raspberrypi/pi_simhub.html
- In summary:
- You must install a desktop Pi OS
- Install Chromium
- Enable autologin in raspi-config
- Flip display and touchscreen controls.
- Find the ip-address of the computer your using and type:
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!