Sim Racing Simhub Flag

FlagThis is my compact Sim-Flag, controllable with Simhub. Feel free to remix, add print-profiles or critizise me :D Parts ListPrinted Parts:Bottom-CaseFront-CoverGlass (template for cutting acrylic glass, in theory it is not needed, but I recommend to test the fit/tolerances first)Other Parts:1x Arduino Pro Micro: USB-C Version1x 8x8 LED Matrix WS2812 5050Cable (22AWG, but any similar cable should work)1x 72x72x3mm Acrylic Glass, 5mm chamfer at the corners (light transmittance of 21%, but you can go darker, since the LEDs are extremely bright, in the photos they are at only 5% brightness)Heat-Inserts:2x M3x4x5mm6x M2x3x3.2mmScrews:4x M2x12mm countersunk head screw2x M2x6mm pan head screw2x M3 Screws (→ Mounting)USB-C Cable ElectronicsThe Arduino must be connected to the LED matrix. To do this, use and solder the 22AWG wires to the corresponding contacts. The Matrix has soldering points on 2 corners. Use the “IN” one, not the “OUT”. I cut the wire to a length of about 8-9cm.V+ → VCCV-