Thingiverse
Simagic Alpha Wheelbase mount
par ratchetfinesse
12
Téléchargements
9
Likes
0
Makes
Simagic Alpha Mini Wheelbase mount. May work for other Simagic Alpha wheelbases but I only tested this on a mini.
2 Positions - One is flat and the other is set at a slight angle.
Uses M6 x 12-15mm flange head bolts. If you can get flange head hex with washers should work but might not clear the opening.
Printed with PETG at 70% infill and it's held up for 10+hrs of use. No supports.
2 files: 1 with a single bracket and then you just need to mirror the 2nd. The other file has both brackets.
2 Positions - One is flat and the other is set at a slight angle.
Uses M6 x 12-15mm flange head bolts. If you can get flange head hex with washers should work but might not clear the opening.
Printed with PETG at 70% infill and it's held up for 10+hrs of use. No supports.
2 files: 1 with a single bracket and then you just need to mirror the 2nd. The other file has both brackets.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
