Thingiverse
Simple 2280 SSD Rack / Box
by mbdmbd
0
Downloads
2
Likes
0
Makes
A little rack that I put together for my 2280 SSD collection.
There are 2 types of trays - flat (because my green filament had horrible adhesion problems) and ventilated.....just to reduce weight and filament use.
There are 4 sizes of trays. The rack holds 2x 3mm, 14x3.5mm, 12x5mm and 2x drawer with lid
I colour coded mine for NVMe and SATA, but the rack is actually symmetrical.
Apologies about the lid - it is an interference fit. So it feels like it won't work to start with but after putting it on and off a few times it is satisfactory. Also it makes a nice stand to tip the box up (keeping the trays from falling out) when you're using it.
Printed on Aquila X2 in various brands of PLA. The only thing that needs supports is the channel for the drawer lid. Everything else can be oriented to print without supports.
There are 2 types of trays - flat (because my green filament had horrible adhesion problems) and ventilated.....just to reduce weight and filament use.
There are 4 sizes of trays. The rack holds 2x 3mm, 14x3.5mm, 12x5mm and 2x drawer with lid
I colour coded mine for NVMe and SATA, but the rack is actually symmetrical.
Apologies about the lid - it is an interference fit. So it feels like it won't work to start with but after putting it on and off a few times it is satisfactory. Also it makes a nice stand to tip the box up (keeping the trays from falling out) when you're using it.
Printed on Aquila X2 in various brands of PLA. The only thing that needs supports is the channel for the drawer lid. Everything else can be oriented to print without supports.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!