Thingiverse
Simple 8x8 LED Matrix Light/Clock
por Roboman444
10
Descargas
8
Likes
0
Makes
# Sunrise Smart Light
Arduino WIFI Clock to animate LEDs with the sunrise.
Based off the [NTP Client](https://www.arduino.cc/en/Tutorial/LibraryExamples/Wifi101UdpNTPClient) sketch provided by Arduino, and using the [Dusk2Dawn library](https://github.com/dmkishi/Dusk2Dawn), modified to run on an ESP-12E.
[All Project Files on GitHub](https://github.com/TylerGriggs/Sunrise_Smart_Light)
# Materials
- ESP-12E (and Micro-USB cable)
- LED Square 8x8
- OLED IC2 32x128 Screen
- Push-Button Microswitch
- 3D Printing Filament
# Print Settings and Instructions
###### Top (for translucent effect using just white)
- Wall Count: 1
- Top Layer Count: 12
- Since the top is printed upside down, the top will be connecting to the base.
- Bottom Layer Count: 4
- Infill:
Arduino WIFI Clock to animate LEDs with the sunrise.
Based off the [NTP Client](https://www.arduino.cc/en/Tutorial/LibraryExamples/Wifi101UdpNTPClient) sketch provided by Arduino, and using the [Dusk2Dawn library](https://github.com/dmkishi/Dusk2Dawn), modified to run on an ESP-12E.
[All Project Files on GitHub](https://github.com/TylerGriggs/Sunrise_Smart_Light)
# Materials
- ESP-12E (and Micro-USB cable)
- LED Square 8x8
- OLED IC2 32x128 Screen
- Push-Button Microswitch
- 3D Printing Filament
# Print Settings and Instructions
###### Top (for translucent effect using just white)
- Wall Count: 1
- Top Layer Count: 12
- Since the top is printed upside down, the top will be connecting to the base.
- Bottom Layer Count: 4
- Infill:
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!