Simple Airsoft antifog unit

Hello I made this antifog for airsoft use. It uses 9-12v dc power from AA batteries, airsoft batteries, etc. This is a diy project that requires soldering and patience. Also nothing prevents you from using 5v fan and a power bank to power this thing (It probably is also better). Hardware used: -40mm dc fan -a RSM101A2C3BK switch (cut a piece off the locking things) -4x m3 x 20 screws -2x m3 x 12mm countersunk screws -velcro tape -some kind of connector for power -mesh to protect from bbs -fan grill I used this one: https://makerworld.com/en/models/2516219-40x40-fan-cover-radioactive-honeycomb#profileId-2908859 -heat shrink tubing -cord -tubing is 6mm Filaments used: -Olive green bambulab abs -Black bambulab petg hf -Overture tpu Removing supports may be frustrating, but with pliers and an allen key it will work just be patient. I sleeved the cable with some cord and heat shrink. After sleeving the cable the start of the cable Is 6mm. The cable locking part is designed for 6mm. Hole for