MakerWorld
Other Hobby & DIY
Zum Modell
Simple Button Box for Racing Simulator
41
Downloads
23
Likes
6
Makes
This is a simple button box I made for a friend.It is designed after the cheap buttons from aliexpress, has a hole the Arduino's USB C to stick out. I recommend hot gluing the Arduino in place. it a top plate that is meant to be dis assembled to get access to the inside and the two mounting holes.The two holes on the back are 8mm in diameter, and fit most alu. rigs, if the hole is too big then just use spacers.What you will receive3 STL files, 1 box and 2 lidsArduino Code for Pro Micro (no rotaries)If you don't know how to wire the buttons then follow AMstudio's video on youtube, there it is clearly explained.Remember to download the joystick library for the Arduino IDE.Part list for the button boxSTL files ;) Arduino Pro Micro4x M3 screwsButtons with mounted diameter of 12mm (all cheap aliexpress buttons)Hot glue gun (to fix mount Arduino, wires, etc)- cheap vinyl (Aliexpress) or use fuzzy skinIf you have any issue feel free to contact me.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!