MakerWorld
Sculptures
Ver Modelo
Simple Cartoon Paw
18
Descargas
9
Likes
9
Makes
Hewo,If you need a helpful paw, here is one for you. You can print it as a decoration or pendant. Basic print profiles include all possible versions. Print profiles:Big PawSmall PawPendant Paw Top HangPendant Paw Bottom HangPrinting tips:Reduce layer height to achieve less noticeable “stairs” effect.Use supports for better overhangs.Print “small” and “pendant” versions with 0.2 mm nozzle for more detailed result.To avoid visible color change through the top layer turn off “Flush into objects' infill” option. Printing in parts: (without AMS)When printing in parts, print the paw pads one by one. If they does not fit, then scale them down a bit (~1-5%). They are designed to fit almost perfectly. Insert them from the inside of the paw, do not force them from the top/outside. I printed my paw in parts on my old printer. All parts in 100% and then 200% scale factor, everything fits perfectly. I used 0.4 mm nozzle with 0.2 mm layer height. Please note that the Paw Bottom part is fully “in
Xermic también publica en
10 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!