Simple Differential

This is a working model of a basic differential intended either as just a fun model or for educational purposes. I designed this so I could learn how to make gears for use in future projects. The gears were made in FreeCAD and imported into Shapr3D for the rest of the modelling.Required Parts8x 625 bearings21x M2 ruthex inserts8mm M2 screws12mm M2 screws21x M2 washersPrintingThe model is designed to be printed directly on the print bed with no supports. Note that I have printed this in silent (i.e. slow) mode to prevent the tall thin objects potentially falling over. I used a 0.4 nozzle with a 0.2mm layer height for everything, and printed the above model using Extrudr NX-2 neon yellow.AssemblingRuthex Inserts12 of the inserts go in the holes in the top of the main body:One insert goes in the end of the handle:Two inserts go in each end of these two sides (total 4).Two inserts in each end of this part (total 4).<img src="https://makerworld.bblmw.com/ma