Simple fast bridging test

Most of the bridging tests I saw were either too large and complicated to print quickly, or printed the bridges at different z-levels, or had huge thick bridges. The first layer of a bridge is really the only one that matters, so I made a quick and easy 1 layer bridge test for fine tuning your settings. There is a single test, with a 25mm length, and a multi test, with 5-25mm lengths. If you want to try for longer, no need for an entirely different stl, just scale the length of the multi-test to 200% in your slicer. Best for use with .04mm nozzle and 0.2mm layer height.