Thingiverse

Simple fidget spinner

von DevDorian

13 Downloads

6 Likes

0 Makes

Another fidget spinner of this same generic design that you see everywhere. Was bored. Wanted to make something quick and easy in Fusion 360.

Requires 4x 608 Skate Bearings, printing the body and 2x of the caps. Press fit the 608 bearings into the body, the caps on either side of the center bearing and voila!

Bearing holes and cap pegs use a 0.01mm press fit tolerance. Should be good for most 3d printers.

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat