Cults3D
Tool
Zum Modell
Simple First Layer Calibration Test
0
Downloads
0
Likes
0
Makes
Simple Buildplate Adhesion Test
Just a 0.3mm thick layer to see how well the first layer adheres to the buildplate and if you have correct squish of the extruded filament. Not needed for self calibrating printers.
The arrow is just for reference of what way it was printed.
300x300 or 200x200 is buildplate size.
Big Square is 280x280mm
Middle Square is 180x180mm
Inner Square is 80x80mm
Just a 0.3mm thick layer to see how well the first layer adheres to the buildplate and if you have correct squish of the extruded filament. Not needed for self calibrating printers.
The arrow is just for reference of what way it was printed.
300x300 or 200x200 is buildplate size.
Big Square is 280x280mm
Middle Square is 180x180mm
Inner Square is 80x80mm
RikiMoto veröffentlicht auch auf
110 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
