Simple headphone stand

DescriptionI was looking for a simple headphone stand that actually had proper support for the headband. Since i couldn't really finds one and, I needed some more training in Fusion360, I decided to create one myself. The base and stand are printed seperate and use a press fit. It's a snug press fit which can still be removed quite easily. Depending on used filament/printer/settings ofcourse. Bottom has some small 10mm indents where you could stick some small rubber or filt feet. Prints in 3h10 using 0.4mm nozzle on my Bambu P1S on 0,2mm layers.Base:Print time: 1h37 (roughly)31gramsStand:Print time: 1h27 (roughly) 23grams2 walls, top 5 layers, bottom 30.2mm layer, 10% grid infillNo Supports or brim requiredIncluded A1 mini plates