Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Gadgets / Simple Polymer Carabiner/Clip
Simple Polymer Carabiner/Clip – 3D printable model from MakerWorld MakerWorld
Gadgets

Simple Polymer Carabiner/Clip

by Fabian Veile · Gadgets
1 Downloads
0 Likes
0 Makes
Go to Model
Hello, this is a simple carabiner. It's not fancy but it is good for light use. I might update the design after a coupe weeks of field testing it.I recommend not attaching more than 1 kg to it, just to be on the safe side.DO NOT USE THIS CARABINER FOR CLIMBING The dimensions are approximately 40 x 70 x 5 mm. How should you print it?The carabiner consists of only one part and can be printed in around 1 hour. I recommend a 0.12 mm layer height and PLA. You can also use other materials, ABS or PETG would be interpretieren. I used a 20% gyroid infill, but you can use a denser one if you want to make it sturdier. I hope you have fun with it.
Category
Gadgets
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Why?
0.12mm layers
Single piece
Supports 1/3
Assembly 0/3
Settings 2/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA, ABS, PETG
Min. bed size
50 mm (Small)
Layer height
0.12 mm
Est. print time
1 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Simple Polymer Carabiner/Clip?
Any FDM printer should handle Simple Polymer Carabiner/Clip just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
How long does it take to print Simple Polymer Carabiner/Clip?
According to the design notes, Simple Polymer Carabiner/Clip takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Simple Polymer Carabiner/Clip available in?
Simple Polymer Carabiner/Clip is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Simple Polymer Carabiner/Clip free to download?
Yes, Simple Polymer Carabiner/Clip is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Portable Cable Organizer / Winder
Portable Cable Organizer / Winder
by squinn
↓ 99.7k ♥ 21.9k
Loud Whistle
Loud Whistle
by Federico
↓ 74.6k ♥ 10k
Fidget Morf Worm
Fidget Morf Worm
by AmandaM
↓ 59.7k ♥ 8.2k
Phone Stand (No AMS needed)
Phone Stand (No AMS needed)
by Reckit
↓ 49.6k ♥ 9.9k
Mechanical Dice
Mechanical Dice
by StatusSymbol
↓ 49k ♥ 15.5k
Cascade card wallet V2
Cascade card wallet V2
by Hugo
↓ 47.6k ♥ 11.9k
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Trends ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection