Slicer Discord
Simple Printable Mini Systainer (Beta) – 3D-printbaar model van MakerWorld MakerWorld
Other Hobby & DIY

Simple Printable Mini Systainer (Beta)

2.4k Downloads
616 Likes
1.3k Makes
Model downloaden
I really like the Festool Systainer and I have a few of them. The only thing not to like is that they are very expensive. This is a similar design to Festool Systainer Mini but more printable with minimal support requirements. Features: Stackable 250x171x71mm dimension. Will fit with Bambu printers except A1. No glue or screws needed. Every part should snap together. No carrying handle to maximize space inside. Slot for sliding labels. You can create your own foam insert or custom 3D print organizer/divider inside. Printing instruction: The body and lid require support. For the body, add support where the feet will be attached and also for the latch lock. For the lid, just add support for the feet alignment area. 0.28mm resolution is suggested All other parts can be printed without support, the ideal resolution is 0.20mm. Support the designer: This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to paypal or bu
Categorie
Other Hobby & DIY
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Gemiddelde betrouwbaarheid
Waarom?
geen supports · grote print · uitgebreide nabewerking
Zonder supports Eendelig Hardware nodig
Supports 0/3
Montage 0/3
Instellingen 1/3
Bedgrootte 2/3
Nabewerking 2/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Min. bedgrootte
250 mm (Groot)
Nabewerking
Lijmen, Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Veelgestelde vragen
Welke 3D-printer is geschikt voor Simple Printable Mini Systainer (Beta)?
Elke FDM-printer zou goed overweg moeten kunnen met Simple Printable Mini Systainer (Beta). Het is geprint op machines zoals Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. Een minimaal bouwvolume van 250 mm wordt aanbevolen.
Heeft Simple Printable Mini Systainer (Beta) supports nodig bij het printen?
Nee, Simple Printable Mini Systainer (Beta) is ontworpen om zonder supports geprint te worden. Dat vereenvoudigt het printen en vermindert materiaalverbruik en nabewerking.
In welk bestandsformaat is Simple Printable Mini Systainer (Beta) beschikbaar?
Simple Printable Mini Systainer (Beta) is beschikbaar in het formaat STL. Deze bestanden kunnen worden geopend en geslicet met gratis software zoals Cura, PrusaSlicer, Bambu Studio of OrcaSlicer voor FDM-printen, of ChiTuBox en Lychee Slicer voor resin-printen. De download wordt aangeboden via MakerWorld.
Is Simple Printable Mini Systainer (Beta) gratis te downloaden?
Ja, Simple Printable Mini Systainer (Beta) is gratis te downloaden via MakerWorld. Controleer altijd de licentie op het oorspronkelijke platform om commercieel gebruik, remixen en naamsvermelding te begrijpen.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie