Simple Puzzle Box

A simple puzzle box, which can be opened by using centrifugal force.


Prerequisites:
It is needed to add 2 nails with the diameters indicated in the picture:
nails head max diameter: 4.8mm
inside nails max diameter: 2.3mm

Mount steps:

1 - Cut the nails to get a max length of 10mm. Next, sand the nail heads until getting the correct diameter.

2 - Put the first nail in place (left side or right side, start with the one you prefer)

3 - Put some strong glue on the little part 2.

4 - Put the little part on top (covering the nail inside)

5 - Repeat the steps 2,3 and 4 for the next side.

6 - Ensure, once glued, the nails can move freely.

7 - Push the nails inside part 1 then put the part 3 (the big ornament part) on top of the assembled part 1 and 2.

8 - Shake all and at this step, the nails will enter in the part 1 so the puzzle box is now closed.

9 - To open the box, twist/rotate the entire box on a table for instance to open it. The centrifugal force