Thingiverse
Simple Raspberry Pi Wall Mount
von martinohanlon
16
Downloads
1
Likes
0
Makes
This is a super simple wall mount for a Raspberry Pi 2/3/4. The mount can be used vertically or horizontally.
It comes in 2 pieces:
- a frame which the Pi attaches too
- a mount which is attached to the wall which the frame slides into.
... this way the Pi can be removed from the wall without having to unscrew it.
All the ports and pins on the Pi are accessible including the SD card.
Print a frame and snap the Pi onto it with the ports facing down. Print a mount, screw to the wall, slide the frame into the mount. :)
Original design is at https://www.tinkercad.com/things/cwr9g3OVnAr
It comes in 2 pieces:
- a frame which the Pi attaches too
- a mount which is attached to the wall which the frame slides into.
... this way the Pi can be removed from the wall without having to unscrew it.
All the ports and pins on the Pi are accessible including the SD card.
Print a frame and snap the Pi onto it with the ports facing down. Print a mount, screw to the wall, slide the frame into the mount. :)
Original design is at https://www.tinkercad.com/things/cwr9g3OVnAr
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
