Simple Small Battleship

This is a simple battleship (self-designated Endurance-class) with simple slip-fit turrets. Unlike the “Simple Large Battleship” design, the hull is printed in one piece and is about 235mm long, allowing it to fit on most print beds (it fits diagonally across my own A1 mini's small 180mm build plate).

The turrets are printed separately and fit over the top of cylindrical mounts on the ship. The primary large turrets can rotate and elevate/lower their barrels. The secondary small turrets can rotate back and forth.

Both STL and STEP files are provided, as well as the original FreeCAD file (RC2) in case anyone wants to modify or remix this design.


PRINTING NOTES:

Print the Ship STL/STEP file.

Print 2 copies of the TurretHousing and 2 copies of the TurretBarrel STL/STEP file (for the front and back turrets).

Print 6 copies of the SecondaryTurret STL/STEP file (for the turrets on the sides). These will benefit from a layer height of 0.1mm (or as fine a resolution