Simple Spool Adapter/Winder (Fully 3D Printable)

I designed this winder to be sturdy while being fully printable and using the lowest amount of filament. Useful info:Fits spools with an internal hole diameter of 45 - 85 mm.When winding you want the drill to be running forward (tightening), otherwise this adapter will come loose.You need to guide the filament manually. If you want to go fast use something to protect your fingers, you might burn yourself (I use a filament clip).When starting, do a handful of wraps of filament without moving it sideways to make sure the end of the filament doesn't come loose.Try to start and end winding smoothly.17/12/2024: Added v2 adapter and a stronger print profile. The v2 adapter adds a chamfer between the cone and hex sections. This should decrease the chance of the hex snapping off.