Thingiverse
Simple toothbrush holder
por eightbinks
0
Descargas
0
Likes
0
Makes
Simple soap tray that clips onto your shower tube. It's made for a 16 mm tube. But you can scale it to suit your needs in your slicer.
In order to scale measure the diameter, in mm, of your own shower tube then divide it by 16 and use the answer as the scale factor of the print.
Ex: your tube has a diameter of 20mm => 20/16= 1.25 where 1.25 is the scale factor of the print.
It should be a tight fit in order for it to clamp securely on shower pole.
Print with relativly high infill and add few extra walls.
In order to scale measure the diameter, in mm, of your own shower tube then divide it by 16 and use the answer as the scale factor of the print.
Ex: your tube has a diameter of 20mm => 20/16= 1.25 where 1.25 is the scale factor of the print.
It should be a tight fit in order for it to clamp securely on shower pole.
Print with relativly high infill and add few extra walls.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
