Simple USB Midi Foot Switch

Basic USB Midi Footswitch.

### Parts

* 1x Atmega32U4 Based Arduino or Clone (mini form factor)
* I used https://www.amazon.com/gp/product/B01MTU9GOB
* 1x 10k ohm resistor
* Some Wire
* 1x 6mm Button
* I used https://www.amazon.com/microtivity-IM206-6x6x6mm-Tact-Switch/dp/B004RXKWI6
* 1x soft mount standoff (optional but makes the whole thing more solid)
* I used https://www.amazon.com/NIDICI-Anti-Vibration-Mounting-Standoffs-Controller/dp/B071WBZC9K/ref=sr_1_1?crid=3BZ2VTU7F63UV
* 2x M3 Screws
* I used https://www.amazon.com/iExcell-Internal-Drives-Button-Socket/dp/B0716Y5WZZ

### Tools
* Wire Strippers
* Hex Driver
* Super Glue
* Hole Punch (Used for expanding screw holes and punching holes for button, you can probably use something else)
* https://www.amazon.com/gp/product/B073WY2HR1

### Assembly
* Punch button holes in case top
* Expand screw holes to grip M3 Screws
* Attach wire leads to button feet
* Run button leads through case top
* Wi