Simpsons Rock

Os dejo una personalización de los Simpsons V-Rock echa con Hueforge. Instrucciones:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x143.6mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.7mmFilaments Used: PLA Sakata 870 Black Transmission Distance: 0.3 PLA Sakata 870 Plata Transmission Distance: 1.8 PLA Sakata 870 White Transmission Distance: 6This print uses 3 unique filamen