Single Rotor RC Hovercraft

Single rotor radio-controlled hovercraft designed to fit a 5inch propeller. Despite only having a single propeller it's quite fast ;-)

Video of the hovercraft in action can be found at the following link: https://www.youtube.com/watch?v=orePqapvzG8

**Required build volume**
All parts are designed to fit on a 18x18x18cm build plate, as I was able to print everything on my Prusa Mini. If you have a larger print bed you can join several parts (of the hull for example) and print them at once.

**Required hardware**
*Nuts & bolts*
* 20 x M3x5mm (Secure top of skirt)
* 17 x M3x16mm + nuts (Secure bottom of skirt)
* 4 x M4x10/12mm + nuts (Mount duct and hull)
* 6 x M4x20mm (Mount top skin to hull)
* 2 x M3x6mm (Mount motor to duct)
* 1 x small screw (Screw servo onto hull)

*Electronics (parts I used)*
- Brushless motor (2204 2300kV mounting pattern = 16x19mm)
- Brushless esc (25A, 4S compatible)
- Lipo Battery(4S 800mAh)
- Receiver (FrSky X4R)
- Servo (+-12g,