Thingiverse
Site Change Tool
di BracerFenix
0
Download
1
Likes
0
Makes
A site change tool used to assist steps in the site change/insertion process.
Compatibility: Designed for the AutoSoft XC Infusion Set.
Uses:
1. Forked side holds down adhesive tape to prevent accidental site removal while pulling back insertion device.
2. Flat side can pry off things, including t:slim X2 insulin cartridges.
General print specifications*:
* Nozzle: 0.4mm
* Material: PETG at normal temp
* Print Quality: 0.20mm Standard
* Wall Loops: 5
* Infill Pattern: Adaptive Cubic
* Infill Density: 15%
* Print Speed: Use default speed for your printer
Feel free to print a batch for other diabetics, I designed them for ease of printing and use. Not meant for commercial purposes.
*I used OrcaSlicer and printed mine with a Bambu Lab P1S. You can set up your own printer on OrcaSlicer or 3D slicer of choice and adjust to the print guidelines.
Compatibility: Designed for the AutoSoft XC Infusion Set.
Uses:
1. Forked side holds down adhesive tape to prevent accidental site removal while pulling back insertion device.
2. Flat side can pry off things, including t:slim X2 insulin cartridges.
General print specifications*:
* Nozzle: 0.4mm
* Material: PETG at normal temp
* Print Quality: 0.20mm Standard
* Wall Loops: 5
* Infill Pattern: Adaptive Cubic
* Infill Density: 15%
* Print Speed: Use default speed for your printer
Feel free to print a batch for other diabetics, I designed them for ease of printing and use. Not meant for commercial purposes.
*I used OrcaSlicer and printed mine with a Bambu Lab P1S. You can set up your own printer on OrcaSlicer or 3D slicer of choice and adjust to the print guidelines.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!