Slicer Discord
Skadis Beam Lamp – 3D-printbaar model van MakerWorld MakerWorld
Office

Skadis Beam Lamp

4 Downloads
8 Likes
1 Makes
Model downloaden
Recently I saw this design online of an H-beam lamp and realized I had to make something like it myself. Now that I have a skadis board, I thought I might combine the two to make this design here, and it came out quite well. This lamp requires the LED lamp kit from maker's supply, and only two M3x12 machine screws. I personally think this type of lamp works best with a textured matte finish, so I went with the PLA-CF Matcha Green, but I'm sure any color would look fantastic. Everything was printed with the 0.4 nozzle with only two walls and 10% gyroid infill. Multiple parts require supports! Assembly is very simple, since there are only three parts. Place the LED in the holder and fit that inside the back of the lamp shade. Screw in the two M3x12's through the sides of the main piece and into the lamp shade to secure it together. Make sure to route the cable up and down the channel on the rear side of the main part before mounting the lamp to the skadis board! Feedback is a
Categorie
Office
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
grote print
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 2/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, Carbon Fiber
Min. bedgrootte
200 mm (Groot)
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie