Skadis Board Brackets for AM4xS Sliding Stack Sys

Description This is a set of two brackets to mount a Skadis board on the side of the AM4xS Stacking System by @jaxel. Take advantage of the side of the stack to hang cardboard spool rings, a build plate scraper, and any other items you want close at hand. Some time ago I created brackets for the original AMS Stacking System, found here: https://makerworld.com/en/models/1276491-skadis-board-bracket-set-for-ams-stacking-system#profileId-1304465 Recently, I was asked if I could create a set of brackets that would work with @jaxel’s new AM4xS Sliding Stacking System. I hope you enjoy these! Printing Please don’t print these in PLA. With PLA, you might find the hooks creep under load and your board falls. I’ve included profiles for PETG and ABS. Tree supports are enabled to support the standoff and hook during printing. I used Arachne wall generation and 25% sparse infill. With normal precautions (clean plate, dry filament, attention to temperature, etc.) you shouldn't need brims or glu