Skateboard Lamp

Will need to print -2- of everything. Place the bulb_base on the skateboard and mark and drill the hole for the lightbulb wires to pass through. Glue the two parts of bulb_hold together lining the holes up together. Then glue the truck pin and truck triangle to the bulb_hold and bulb_base. Run the wires from the ceramic bulb holders through the holes in the bulb_hold and base and glue the bulb holders into the bulb_hold. Paint as necessary and assemble with the bolts. It's a tight fit and the bolts need to be tightened a little at a time and evenly or the bracket will crack. Wire everything together to a plug and switch and you're done.

Skateboard I used (can't guarantee these part will work with every skateboard): https://www.amazon.com/dp/B08XTXV3LB?psc=1&ref=ppx_yo2ov_dt_b_product_details

Will need 8 x 10-32 x 1 1/2 inch bolts
Light bulbs (4) - https://www.amazon.com/dp/B01I1X5PP2?psc=1&ref=ppx_yo2ov_dt_b_product_details
Ceramic bulb holders (4) - https://www.amazon