Skateboard Wheel Bearing Combo

A concept for skateboard wheels to be combined with the bearings that normally go inside of them to make a combination wheel and bearing.

***Please note: It has yet to be tested, as the person who I originally printed them out for hasn't gotten back to me on whether or not they work, and what needs to be changed***

**You will need:**
- 3 or 6 M2.5x20 screws

*(In theory, can be any length from 10mm to 20mm long, as it's just used to hold the top of the cage to the bottom section. Though, I imagine that the longer screw would help give the print more reinforcement...)*

Supports are needed for the inner section, outer section, and the bottoms of the rollers.
The top and bottom cage pieces can be printed without.

There is also likely a lot of play in the bearing when you print it, as the tolerances are designed for my printer, so you may need to print the rollers a little bit bigger or smaller, depending on your printers configuration. Keep in mind only to increase the X &