Skeleton in Blossoms

This is a rather long print (9 hours). If you want to print this quicker, you can certainly do so at a 0.08 layer height instead of 0.04. I also used a strikingly bright combination of colours for this print, and you can certainly swap them for something more amenable to your palette. Have fun! Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used:- PLA Kingroon Black Transmission Distance: 0.4- PLA CC3D Lemon Yellow Transmission Distance: 8- PLA Sunlu Lila