Sketion Filtered Enclosure

I designed and built this enclosure for my Prusa. The CAD for the cabinet and the printed parts are included in the zip file.

Credit to my lovely girlfriend for assisting in construction.

BOM
Ikea Sektion Base Cabinet 24x24x30
Ikea Utrusta shelf (2 pack) 24x24
Ikea Besta Hinge (2 pack)
Ikea Sindvik door 23 5/8 x 25 1/4
3/4" Melamine Board ( you will need about 2' x 5', but it normally comes in 4'x8')

140mm fan (I used a Noctua NF-A14)
M4x30 qty: 8
M4x20 qty: 6-9
M4 nut qty: 14-17
carbon filter sheet
LED strip

Construction:
I believe assembly of printed parts is straight forward. If I am wrong let me know and I will elaborate.
I used a router with a circle jig to cut the exhaust fan hole.
The MDF melamine boards were cut, and screwed together along with wood glue. I used iron on white strips from home depot to finish the cut edges.