SKR 1.4 Case

Models available only on https://www.prusaprinters.org/cs/prints/93817-skr-14-turbo-bear-case


I wanted some case for new skr 1.4 turbo that will look as Průšas case, so i made one, it is based on step files from internet, it is made for 2040 AL t-slot profiles, but it will work with 4040, and maybe with v-slot profiles, didn't tried. You can follow Průšas assembly instructions for this one too, except few nuts and screws, but in mirror manner. I have mirrored the case for better acces.

It is not suitable for skr board with wifi module, but with few cables it can be connected anyway.

https://help.prusa3d.com/en/guide/8-electronics-assembly_34416

In the door part is space for Noctua 40x10, there is probably no need for it, but i like the look, so i put it there.

Parts should be printed as is

You will need one pcs of each part

You will need 4pcs M3x8 - 10 screws for f)fixing the board to the housing, they are tight fit, it should make its own threads in the printed