skul hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Kexcelled Skin Transmission Distance: 4Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Red At layer #7 (0.64mm) swap to Yellow At layer #12 (1.04mm) swap to Skin for the rest.