skull bookmark

this is my first hueforge bookmark. please follow this: slice first: point 1: reduce only x and y axes and not the z axe. point 2: slice the bookmark first : ---------------------------------------------------------------------------------------------------- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 86.18x441.01mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Sunlu Grey Transmission Distance: 3.5 PLA Kingroon White Transmission Distance: 4.7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest. To purchase a commercial license and sell my creations, access to my KO-FI SPACE Alternatively, make a sma