Thingiverse
SKULL HOPPER
von SHOCKMASTER
0
Downloads
0
Likes
0
Makes
20-25 round Skull Hopper w/ Feed
I would recommend printing the hopper in either PLA+ or PETG to survive the elements and rough play on the field.
The feed gate must be printed in TPU 95A (or softer)
Your slicer may say the hopper model is not watertight; this was determined to be.... a lie.
It should print just fine.
Usually on most models, if it isn't watertight; it is still printable. Always check your g-code layer view preview before printing anything. if you have an issue, try re-slicing the model.
I will upload new .stl files for any modifications I make to the model.
Picture of printed hopper coming soon, lol.
Original Skull Model - https://cults3d.com/en/3d-model/home/skull-scar
Please give credit to this golden god, cuz this model is awesome.
I would recommend printing the hopper in either PLA+ or PETG to survive the elements and rough play on the field.
The feed gate must be printed in TPU 95A (or softer)
Your slicer may say the hopper model is not watertight; this was determined to be.... a lie.
It should print just fine.
Usually on most models, if it isn't watertight; it is still printable. Always check your g-code layer view preview before printing anything. if you have an issue, try re-slicing the model.
I will upload new .stl files for any modifications I make to the model.
Picture of printed hopper coming soon, lol.
Original Skull Model - https://cults3d.com/en/3d-model/home/skull-scar
Please give credit to this golden god, cuz this model is awesome.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!