Skull (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #e2dedb PLA PolyLite White Transmission Distance: 5 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #080a0d PLA PolyLite Black Transmission Distance: 0.3This print uses 3 unique filaments Swap Instructions: Start with White At layer #8 (0.72mm) swap to Blue GrayBorder Only Colors from here until the end. At layer #23 (1.92mm) swap to Black for the rest. MembershipPlease join for commercial use