Thingiverse

Skyflex 2000 Triblade Propeller

by AeroPhil

3 Downloads

4 Likes

0 Makes

My first Propeller Design. Made this because the original Prop broke. Hope this thing will last more than one flight.... Let's see. As I'm writing its still printing (About 18h with Support, Brim and 80% Infill)

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

18 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Skyflex 2000 Triblade Propeller need supports when printing?

Yes, Skyflex 2000 Triblade Propeller will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Skyflex 2000 Triblade Propeller?

According to the design notes, Skyflex 2000 Triblade Propeller takes approximately 18 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Skyflex 2000 Triblade Propeller available in?

Skyflex 2000 Triblade Propeller is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Skyflex 2000 Triblade Propeller free to download?

Yes, Skyflex 2000 Triblade Propeller is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Skyflex 2000 Triblade Propeller

Add to Collection