Skylake delid tool

Description!!!!!You may Try out the Kaby-LAKE Delid tool as Skylake CPUs should also work with it !!!!! A simple tool to remove the Heatspreader of your Skylake CPU. tested with 6600K, 6700K, 4790K , G3258 (Skylake / Devils Canyon / Haswell ) May also work some other Haswell/Broadwell/Devils Canyon 115x CPUs (Heatspreader with sharp corners, only partially tested)* print both parts, * put some sort of rubber or foam on the inner bottom of the base.* put the CPU into the CPU-holder with the long PCB part looking over the end of the tray. * then put it in your vice and close it carefully.For enough strengh print at least with 3 perimeters and 30% infill !USE AT YOUR OWN RISK !!!* Only for CPUs who are glued and with thermal-paste, not for soldered CPUsEDIT: Does not Work with Ivybridge (* If someone is able to try out Ivybridge (round Heatspreader corners) it would be cool to give a feedback if it works, as i dont have such a CPU for test. ) Materials and methodsSome sort of thin foam/ru