Skyrim dragon necklace

Printing (resin - original anycubic photon)I included my supported stl's as well as the sliced files for the anycubic photon S.My print settings: (in use in the pre-sliced file)Printer: Anycubic photon SWhat to print?: 4 double sided skyrim necklaces at onceTime to print?: around 8 hoursLayer height: 0.02 mmQuantity of resin used: around 20 mLType of resin: Anycubic Eco plant-based resin (macaroon pink and blue)Printing temp: around 20C, the highest I could get at the timeWashing, CuringI recommend removing the supports before curing. It's a bit more tedious with gloves and a mask, but they come off easier and there is less risk of damage.also recommending to cure underwater, just tried with the last batch and they came out great. SandingI started with 100 grit, then 150, 250, 600 grit.Basically sand the supports marks until they are flat, then increase the grit to have a smooth finish. PaintingI did two thin layers of black primer, then two layers of shiny chrome, short/!\ WAR