Skyrim Spear by Lanetary

This is a Skyrim Dwemer Spear modeled by Lanetary and downloaded from sketchfab.com. I cut up the model to make it 3d printable.
https://sketchfab.com/Lanetary

Printed in a Voron 2.4 out of Hatchbox PETG

The settings I used were unsatisfactory. I'm not sure what settings are most efficient, but I will let you know what I used and what problems I had.

I used 20% infill on most of the model, with 3 walls on most parts. The problem I had was that the infil was visible from the top of the model. I used 5 top layers on the spear blade as an exampe, and that wasn't enough with my low infil. Bottom layers were usually only 2 or 3 layers since they were often two halves superglued together.

For the pole, I used a wooden dowel. I scaled up the STLs 190% to fit the dowel. Easiest way to figure out the fit is to print the SpearDiameterSizeTest.stl and find the right scale for your dowel.

I printed out of PETG, which I'd heard had problems painting, but I didn't have any issues.