skysolve case type 2

This is a case and parts for the skysolve plate solving telescope finder.
https://github.com/githubdoe/skysolve

Printed with 3 perimeters so holes can be drilled to different sizes.

Addition parts are
3 hex head machine screws of size 6-32 by 1 inch long or M3 x 25
to be press fit through and into the knobs.

4 M2 x 5 screws to mount the inno-maker CAM-IMX296Mono-GS camera

a 1/4 -20 nut can be pushed into the slot provided for it on the bottom part to create a tripod socket attachment point.

A spongy foam piece like a mouse pad can be used to create a spring that mounts between the camera on the tilt board and the end plate. The three screws hold the tilt plate tight against it and can be turned to adjust the angle of the camera.

Based partly on this design https://www.thingiverse.com/thing:6697493/files by Fabio_eng