SLA cover ceiling mount

Simple design to keep the cover(s) of your machine(s) out of the way while transferring the model from the printer to the wash and cure machine or simply to optimize some space in your workshop.

The top is screwed to the ceiling of the cabinet (I used 3 wood screws), and the cover part is made of two halves (one inside and one outside the cover) bolted together with M3 screws into M3 threaded inserts. I suggest to use a double sided tape to make the top half glued to the cover, and than drill the 3mm holes needed to connect the two halves together.

If you don't have any cabinet to mount the top part on, you can also simply install the lower part and use it to avoid touching the plastic cover with dirty gloves).