Slam Dunk Poster Lithophane

站内有一个有水印版的.自己弄了一个没水印的-------------------项目：slamdunk.hfp以0.08mm的层高度以0.16mm的层为0.08mm的100％填充物打印该型号的尺寸为200x138.22mm您可以在0.24mm的最小深度以下以较高的高度打印最大深度为2mm，实际深度为1.8mm使用的细丝：PETG JAYO黑色传输距离：0.3PETG BAMBULAB基本红色传输距离：2.7PETG BAMBULAB基本黄色传输距离：2.7PETG JAYO白色传输距离：6该印刷使用4个独特的丝交换说明：从黑色开始在第6层（0.56mm）交换至红色在第11层（0.96毫米）交换为黄色其余部分在第17层（1.44mm）交换为白色。--------------------------------------------------------------------Project: slamdunk.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x138.22mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.8mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG BambuLab Basic red Transmission Distance: 2.7 PETG BambuLab Basic yellow Transmission Distance: 2.7 PETG JAYO White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to red At layer #11 (0.96mm) swap to yellow At layer #17