Slic3r Temp Tower G-Code (Prusa MK3)

I am mostly uploading the gcode here as a quick backup. Anyways, the gcode was made for the MK3 on Slic3r. The PLA temp tower ranges from 200 to 220 with a 5 degree between.
I might add a PETG later.

It should be noted that I will update these files as I see fit

The PLA gcode takes about 2.5 hours to complete.

_________________________________________________

NOTE: It should be noted that I have my printer play a note at the very start and end of the print. When it plays a note at the very start, it is letting you know the heating is done and it's about to do the mesh level. I use this to help clean the nozzle area if needed. The end obviously is some audio telling me the print is done. If you want this on your prints do the following.

In Slic3r go to "Printer Settings. Then go to "Custom G-code". Add the following for the start. (You can edit the sound BTW)

; gcode start sound
M300 S440 P500
M300 S880 P500
M300 S440 P500

(I have a complete copy and paste of